■ Characteristic
HZ-051 is HDPE (high density polyethylene) grafted with maleic anhydride and used as adhesion promoter for PE powder coating. It can greatly improve the adhesion strength of thermoplastic powder coating to metal. It is widely used to produce polyethylene engineering plastic powder.
Main Performance of HZ-051
Performance | INDEX |
Appearance | White or Light yellow pellets |
Graft Rate (%) | 0.8 ~1.2 |
Melt Flow Rate(g/10min) | 3.0 ~ 6.0 |
Density(g/cm3) | >0.945 |
Tensile strength at break (Mpa) | >12 |
Elongation at break (%) | >100 |
Melting point (℃) | >133 |
■ Processing and Application
Blended and granulated with PE powder coating.
The suggested additive level of HZ-051 is 5% - 15%(wt%).
■ Package, storage and transportation:
Packed in paper plastic composite bags, 25kg/bag.
Keep away from sun light, rain and wet
Note: The technical data contained herein is believed to be reliable, but users should not rely upon it absolutely for specific applications because performance properties will vary with processing conditions. Users of PARKSON products should make their own tests to determine the suitability of each such product for their particular purposes. Above is the typical experimental data, real and reliable. It is only used for reference, not as formal quality promise.
