1123 is a maleic anhydride grafted polyethylene which is a type of adhesive polyethylene resin used for composite pipes. While maintaining excellent chemical resistance, weather resistance, excellent processing properties and mechanical properties of polyethylene, it has excellent bonding properties and is highly bonded to metals such as polyethylene and aluminum, steel and lead. force.

1123 has a high grafting ratio, high polarity, low bonding temperature during compounding, and good adhesion when used on a plastic-lined composite tube.

　　　 Main performance of 1123

Performance	Indicator
Exterior	White or light yellow uniform particles
Melt Index(g／10min)	3.5±1
Density（g/cm3）	0.96±0.01
Vicat softening point（℃）	>95
Melting point（℃）	128

use

The recommended extrusion temperature for 1123 is: 180 ° C, 200 ° C, 220 ° C, and the die 230 ° C - 260 ° C. When used on a lined plastic tube, it is suitable for high frequency processes.　　　　　

Bonding properties of 1123 with different substrates

Base material	Substrate thickness（mm）	Bond strength（N/25mm）
aluminum	0.2	>100
steel	1.0	>120
lead	0.2	>80
copper	0.2	>80

Instructions

Co-extrusion coating.

Packaging, storage and transportation

Packed in paper-plastic composite bags lined with plastic bags, each bag has a net weight of 25kg±0.1; it is protected from the sun, rain and moisture.

Note: The above data is typical of the laboratory, true and reliable, for reference only, no formal quality commitment.

PrevPPR Hot Melt Adhesive for Aluminum Plastic Composite Pipe(G6)

NextPE Hot Melt Adhesive for Composite Pipe(A2)

Share to：