MAH-G-High-Density polyethylene （HAD-14、HZ-002）

Characteristic:

HAD-14 and HZ-002 are high density polyethylene grafted with maleic anhydride. They are used to fill or reinforce polyethylene. As chemical coupling agents, they can greatly improve the mechanical and thermal properties of filled or reinforced polyethylene.

These products can be used for thermoplastic polythene powder coating.They greatly improve the adhesion of thermoplastic powder coating to metal.The materials are widely used in the production of thermoplastic polyethylene engineering powder.


                                       Typical Property Data

Performance

Index

HAD-14

HZ-002

Appearance

White or light yellow equal pellets

White or light yellow equal pellets

Maleic anhydride content %

0.8-1.2

0.6-1.2

   Melt Flow Rate（g/10min）

2-5

7-10

Shore(D)

60

60

Melt point（℃）

130

130

Note:The above is the control data during production, and the melt index will decrease with the placement time.


Application：HAD-14 and HZ-002 are generally used as tackifier for thermoplastic polyethylene. They are also modifiers for glass fiber reinforced PE and filled PE (talc powder, aluminum hydroxide, magnesium hydroxide, wood powder, mica, wollastonite) . It is recommended to add 2.5% - 10% (relative to PE).


Method of use:

Coextrusion coating.


Packed in paper plastic composite bags, 25kg/bag. Keep away from sun light, rain and wet.

The technical data contained herein is believed to be reliable, but users should not rely upon it absolutely for specific applications because performance properties will vary with processing conditions. Users of BAICHEN products should make their own tests to determine the suitability of each such product for their particular purposes. Above is the typical experimental data, real and reliable. It is only used for reference, not as formal quality promise.

Share to：