MAH-G-Polyolefin elastomer elastomer （PC-8C）

Characteristic:

PC-8C is a maleic anhydride grafted polyolefin elastomer complex.It is a high effective toughening agent of polyamide (nylon),which can greatly improve the impact resistance and dimensional stability of nylon, reduce water absorption.

                                   PC-8C Typical Property Data

Performance

Index

Appearance

White or light yellow equal pellets

Maleic anhydride content %

0.8-1.2

   Melt Flow Rate（g/10min）

≤3

Matrix resin

Polyolefin elastomer elastomer


Application: It can be used to toughen nylon or TPE system to improve the adhesion of TPE to metal or other interfaces.

                                  Properties of PA6/PC-8C Blends

Addition amount（PC-8C）

Tensile Strength at Break (MPa)

bending strength (MPa)

Notched impact strength (kJ/m2)

0%

67

80

3.8

10%

64

77

40

20%

59

69

70


Method of use: blended with nylon


Packed in paper plastic composite bags, 25kg/bag. Keep away from sun light, rain and wet.

The technical data contained herein is believed to be reliable, but users should not rely upon it absolutely for specific applications because performance properties will vary with processing conditions. Users of BAICHEN products should make their own tests to determine the suitability of each such product for their particular purposes. Above is the typical experimental data, real and reliable. It is only used for reference, not as formal quality promise.

Share to：